Product: Seachem Prime 500
Guaranteed Analysis (per 1 g): Aluminum, 10210, 124 Barium, Calcium 195, Cobalt 6, Chrome 13, Copper 17, 18500 Iron, Potassium 2195 2281 Magnesium, Manganese 64, Sodium 223, Nickel 12, 15 Vanadium, Zinc 29
Available sizes: 50 ml, 100 ml, 250 ml, 500 ml, 2 l, 4 l, 20 l
Prime ™ is a complete and concentrated conditioner for both the aquarium freshwater saltwater. Prime ™ removes chlorine, and ammonia converts the ammonia in a non-toxic form that is readily removed from the filter. Prime ™ allows the filter to more easily remove nitrite and nitrate harmless and also makes all the heavy metals in tap water. It has no effect on pH. Can be used during the start-up and every time you add or replace the water.
Use 5 ml per 200 liters of fresh water. This eliminates dose about 0.8 mg / l of ammonia, 1.2 mg / l of chlorides or 3.3 mg / l of chlorine. For smaller doses, please note that each cap is equivalent to approximately 1 ml. It can be added directly to the aquarium, but you will get better results if you added the water before you put it in the aquarium. When added directly to the tank, calculate the dose on aquarium volume. Any sulfur smell is normal.
In case of very high concentrations of chloride, one can use a double dose safely. In the presence of temperature greater than 30 ° C and low levels of chlorine and ammonia, using half dose.