Product: Seachem Prime 250ml (Bio-conditioner for both fresh and salt water)
Guaranteed Analysis: Aluminum 10210, Barium 124, Calcium 195, Cobalt 6, Chromium 13, Copper 17, Iron 18500, Potassium 2195, Magnesium 2281, Manganese 64, Sodium 223, Nickel 12, vanadium 15, Zinco 29
Sizes: 50 mL, 100 mL, 250 mL, 500 mL, 2L, 4L, 20 L
Prime™ is the complete and concentrated conditioner for both fresh and salt water. Prime™ removes chlorine, chloramine and ammonia. Prime™ converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Prime™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. Prime™ detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. It will also detoxify any heavy metals found in the tap water at typical concentration levels.Prime™ also promotes the production and regeneration of the natural slime coat. Prime™ is non-acidic and will not impact pH. Prime™ will not overactivate skimmers. Use at start-up and whenever adding or replacing water.
Use 1 capful (5 mL) for each 200 L (50 gallons*) of new water. For smaller doses, please note each cap thread is approx. 1 mL). This removes approximately 0.8 mg/L ammonia, 1.2 mg/L chloramine, or 3.3 mg/L chlorine. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.