Product: SCHEGO membrane pumps – optimal - 250 l/h
Information:
Very quiet, gently running aquarium pump, continuous regulation, easily replaceable air filter.
Long life, reliable membranes. Trasparent housing with suspension.
Volt: 220-240V/50Hz
Only for use in rooms
max. approved delivery head: H max. 3m
Important: Choose location of the membrane pump above the water surface height of the basin or use sui-table non-return valves to prevent liquid flowing back into the pump.
Observe without fail: Install or fasten the membrane pump when starting up so that the unit cannot fall into the water.
Attach hose connection, plug in mains plug.
Maintenance:
Change the prefilter in the base plate regularly if contaminated.
In the case of loss of performance and with strong contamination also change the white pump head:
- Pull out the mains plug.
- Loosen the retaining screws on the bottom part and lift off housing cover.
- Unscrew membrane nut.
- Loosen retaining screws on the metal rocker.
- Lift off the metal rocker.
- Pull off the membrane or replace the complete pump head.
Assembly in the reverse order
Distance between magnet and coil approx. 1 mm.
If the connection cable of the unit is damaged, it must be replaced by the manufacturer or its customer service.
|
