Filter for ponds up to 10,000 liters
Features:
Basic filter useful for small ponds up to 10,000 cubic meters; complete with mechanical and biological filter material. Built in non-toxic and easy to locate.
Size:
cm40x30x50h
Multistage filtering:
The filter is fully equipped with biological and mechanical filter material.
The mechanical filtration is guaranteed by sponges and filter floss that trattenogo and imprison suspended particles and impurities present in the water.
The biological filtration is operated by Bioball constituting a habita ideal for bacterial flora; can be combined to Bioball of razor clams to increase the capacity to host the bacteria.
Maintenance:
the filter should be cleaned regularly, about every 2 or 4 weeks. During the initial period after the 'installation, and when the' pond water becomes particularly murky, it is advisable to wash it more often.
To do this, turn off the pump, remove the filter material (with the exception of biological material headquarters of the bacterial flora), rinse in a bucket and replace the filter following the same original order.
Depending on the model, you can receive, in addition to the filter, a pond pump and / or a sterilizer.
Pump P-2000:
3 different games d 'water
capacity of 2000 L / h
prevalence 3,20m
consumption 45w
nozzle diameters 20,25 and 32mm
Sterilizer 11w:
Designed and constructed to reduce disease, useful to control the proliferation of many algae. Equipped with UV-C, which opposes the development of pathogens, such as bacteria and protozoa, among the most responsible of the diseases of aquarium fish. Connected to the pump or filter, the water runs diagonally through the slot. The passage of water, the lamp bulb emits UV-C, which kill pathogens cause disease. This significantly reduces the danger of the spread of major diseases of aquarium fish.
Models available:
Biofilter Basic:
L 'inlet nozzle is positioned on top of the filter, the output is placed at the base.
The union input has the ability to be connected to pipes 20, 25 and 32mm while the output mounts 32mm tubing.
Biofilter Basic Plus Pump:
same amount for the Basic Biofilter with in addition the pump P-2000
The receptacle of the filter inlet has a diameter of 25mm while the output mounts 32mm tubing.
Biofilter UV:
Same configuration as the Basic Biofilter with in addition to the UV sterilizer 11w.
The sterilizer is mounted on the inlet hole of the filter and is equipped with nozzles for pipes from 20 to 40mm
Biofilter UV Plus Pump:
same endowment of Biofilter UV with the additional pump P-2000.
Biofilter Camouflage:
its practicality is given by the possibility of burying the filter as the nozzles of the input and output of 'water are placed on top of the container thus making it almost invisible to the eye.
The supplied filter is the same as the Basic Biofilter.
The filler inlet has the possibility to be connected to pipes 20, 25 and 32mm while the output mounts tubes 40mm.
Biofilter Camouflage Plus Pump:
same endowment of Biofilter Camouflage Added the pump P-2000
The filler inlet has the possibility to be connected to pipes of 25mm while the output mounts tubes 40mm.
|