Product: Forwater SILCO HP 1000ml
Applications: fresh and salt water aquariums
Information:
A brand new resin is ready for use in grade laboratory indicator of depletion of the indicator changes color to the production of fully deionized water and high purity.
Designed to provide purity levels never achieved before with a resin of the indicator changes color and is designed for applications where required the production of ultrapure water with conductivity values are very low. Suitable for water production, laboratory, marine aquariums, dentistry and for all uses in which it needs to have a completely de-ionized water and free of silicates, phosphates, nitrates and all harmful components that may still be present in water.
SILCO HP has the ability to turn color when exhausted going from blue to yellow with a significant color effect. The exhaustion of the resin is evidenced by the gradual progress of the layer of yellow over the layer of blue with a clear line of demarcation.
SILCO HP produces water of high purity reaching a conductivity of 0.1 mS / cm - 10 megohm.
Uses And Applications:
Post-filtration and reverse osmosis demineralization systems for the production of pure water laboratory grade.
Production of fully deionized water and free of silicates, phosphates and nitrates.
Chemical And Physical Characteristics:
- Translucent beads in blue and yellow
- Size from 0.4 to 1.3 mm
- Color total color change from blue to yellow
Method For Use:
To treat the water using reverse osmosis deionised FORWATER cartridges can be opened using supplied equipment.
Warnings And Precautions:
Keep out of reach of children. If swallowed contact a doctor.
Can cause eye irritation. In case of contact with eyes, rinse thoroughly with running water holding eyelids open
Avoid dropping the product. May lead to falls in the case of trampling the resin.
Method Of Storage:
Store the resin in the dark and into the jar tightly closed to avoid a prolonged contact time with the atmosphere.
|
