Product: ATI Fiji White Sand 9,07Kg
Features:
High purity, fine, white gravel for sea water aquaria (0.3 to 1.2 mm grain size).The Fiji White sand is characterized by many positive features:
1)Highest purity:
Our sand is 99.6% pure calcium and magnesium compounds, making it one sen cleanest materials that you get on the market today.
2)Very white and high reflection properties:
Due to the high purity of the sand is very white. This is for the total brightness of the aquarium is very advantageous. Corals get so similar in nature, a higher proportion of reflections off the ground, which is very beneficial for corals. The Fiji White sand is ideal for light-hungry corals Aqaurien with, since they will also receive a higher proportion of diffuse radiation from below.
3)No extreme drifts more:
Because of its higher density than comparable Aragonitsand of Fiji White sand is much harder and better around it remains current.
Application:
We recommend a bed depth of about 2cm. When DSB at least 8-10cm.
Due to the small grain size of sand is good for an accumulation of fluid in the substrate detritus largely avoided.
The sand should be washed before use in the aquarium several times well. The existing dust content, which is always produced by friction during transport etc. should be rinsed out as far as possible. Rinse the sand for this purpose as long as no more until the water milky / white, and mostly clear.
|