Product: WAVE pH Controller for the detection of pH
Ph Wave Controller is a tool for the detection of the degree of acidity or alkalinity (PH) to measure the pH in both freshwater and marine aquariums.
Ph Controller allows you to manage a device for controlling the same that can be connected via the included power strip. The probe included in the package, comes with electrode holder to be able to comfortably and safely place the electrodes inside the tank in the right position. Measure the pH value, while the control box with digital display toggles the device connected to it (such as CO2 or dosing pump systems).
Ph Controller allows, thanks to the key HI - LOW monitor both the acidity or alkalinity. Setting this key HI, whenever the sensor detects a pH value higher than that set will activate the device to lower the acidity related to the strip, like a 'solenoid to control CO2. If the key is set to LOW instead, whenever the pH values fall below the set level PH Controller will give power to the dosing pump connected to it via the power strip. Solenoid and / or dosing pump are not included in the offer.
Wave Ph Controller can be supported to a floor, or even hanging on the tub wall with all the accessories included.
Included in the package there are two standard solutions at pH 4.0 and pH 7.0.