Product: Ruwal Filtraphos 10 for aquariums up to 400 liters
The filter pool for phosphate Filtraphos 10 may be used even in the absence of a water collection tank positioned beneath the aquarium.
In fact it can be positioned, as well as inside or next to a tank to collect water, even the side or below the aquarium.
The filter pool for phosphate Filtraphos 10 uses NOPHOS 101, a resin highly selective for the removal of phosphates in both freshwater and sea.
The filter pool for phosphate Filtraphos 10 works on the principle of "fluid bed" (movement of water from the bottom up) to avoid any packing of the filter material, although unlikely given the large size of NOPHOS 101.
The filter pool for phosphate Filtraphos 10 is equipped with a recirculating pump suitable for use inside or next to a water collection tank (sump), in which case the water flow will be of approx. 15-20 l / h, optimal for the removal of phosphates to the concentration of 0.2 mg / l, or when the filter is used to prevent the presence of phosphates in the aquarium.
In case of higher concentrations, the flow must be reduced by approx. half by leaving the tap which is fitted to the filter Filtraphos 10.
Should be positioned below the aquarium and connected directly to it, must be fed with a pump that ensures the prevalence of adequate ports.
12 cm - height 30.5 cm
Content NOPHOS 101: approx. 900 ml
Attack input: 6 x 8 mm tube
Attack Out: 4 x 6 mm tube