Product: Prodac Magic Control
MAGICONTROL is a safe and precise thermostat for regulating the temperature of the water when used in aquariums and of the air when used in terrariums. It connects to any heating cable (substrate heater) or fixed heating element up to 300W.
Installing in an aquarium:
Warning: before performing any type of aquarium maintenance or intervention, disconnect all submersed electric appliances from the mains and check that the voltage indicated on the product corresponds to your main supply. Mount the clips to the suction cups and attach to the glass tube. Place the thermostat in a vertical position and attach the suctions caps to the glass wall of the aquarium. The ideal position is where there is greater water circulation and the maximum depth of 0,15 m. The water level must not be below the wording "MINIMUM WATER LEVEL". Adjust MAGICONTROL to the required temperature and connect the plug of the heating element or heating cable to the socket provided. The socket and plug must not be placed in the water. Connect the thermostat to the mains power supply. Install the thermostat away from heat sources which alter temperature readings.
Installing in terrarium:
The thermostat can placed either in a vertical or horizontal position. Place the thermostat in an area of the terrarium where there is greater air circulation. Adjust MAGICONTROL to the required temperature, and connect the plug of the heating element or heating cable to the socket provided and then connect the thermostater to the mains power supply. Install the thermostat away from heat sources which alter temperature readings.
How to use:
After a few hours of operation we recommend you control the water or air temperature with a thermometer and adjust temperature if necessary. In the event the aquarium or terrarium has not reached the correct temperature, check that the heating cable or heating element is of a suitable voltage/wattage. MAGICONTROL is ideal for controlling the temperature of several aquariums on condition that all the aquariums are of the same capacity (same water volume) and are all in the same location.