Product: Forwater SILCO Resin Deionizator Anti-silicates with indicator exhaustion Color Toning 500ml
Applications: Fresh and salt water aquariums
SILCO is ready to use a resin with excellent physical and chemical characteristics of high performance suitable for the production of fully deionized water and desicilizzata high quality and high purity.
Resin with special characteristics that make it suitable for water deionization osmosis plants and for demanding applications, particularly for the treatment of waters with high loads of silicates and organic matter.
SILCO has the ability to turn color when exhausted going from emerald green to blue color effect with a significant effect of removing everything that does not retain the osmotic membrane.
If the transition occurs with a water flow equal to 5 - 40 liters water / hr / liter of resin you can have the complete reduction of the dissolved solids reaching a conductivity of 0.1 to 0.05 μ S / cm. However, if you want a more pure water will be needed before replacing the resin turns blue.
It does not release waste into the water.
Uses and applications:
Post filter for reverse osmosis water production completely deionized and ultrapure (laboratories, aquarium)
Chemical and physical characteristics:
- Beads translucent white and green
- Bead size 0.4 - 1.3 mm
- Indicator changes color from emerald green to blue Low
- treated water pH 6.5 to 7.5
- 1 liter of resin can treat up to 3000 liters of water reverse osmosis
How to use:
To treat water using reverse osmosis deionised FORWATER cartridges can be opened using supplied equipment. It is recommended not to use filters in fluidized bed so as not to affect the characteristics of the product.
Warnings and precautions:
Keep out of reach of children. If swallowed contact a doctor.
May cause eye irritation. In case of contact with eyes, rinse thoroughly with running water holding eyelids open.
Store the resin in the dark and tightly closed bag to avoid a prolonged contact time with the atmosphere.