Product: Forwater Osmopure 50 Pro008 50 GPD
Applications: Fresh and salt water Aquariums
OSMOPURE50 PRO08 - PROFESSIONAL OSMOSIS PLANT FOR THE PRODUCTION OF ULTRA PURE WATER SERIES PROFESSIONAL OSMO 50 GPD
OSMOPURE50 PRO08 is a reverse osmosis system designed for professional glass aquariums and for all other uses in which it needs to produce pure water, devoid of any contaminant and completely with a post treatment with deionized deionizzanti resins and antisilicati latest generation.
The water in the path that takes the point of supply of public water systems to our taps has been enhanced with many poisons (copper, rust, zinc, heavy metals, etc..) Which removes the tube and / or it comes in contact when accumulated in tanks. The system built with the highest quality components has been designed taking account of these issues and the real need to have a water completely free of any harmful substance from the public network and have a minimum operating cost.
Produced in Italy using only the highest quality materials and completely non-toxic NSF certified buildings in Europe and the United States for use with potable water and built to the highest standards of quality commercially available. The plant uses LLDPE pipes and fittings with quick connect original John Guest, the first company in the world in achieving a quick connector for use in food and world leader thanks to the high quality of its products certified ISO 9001, ISO 14001, NSF 51 and NSF 61 and made solely of non-toxic materials approved by the FDA. Unlike the Asian poor copies, pipes and fittings JG John Guest quick ensure perfect fit and lasting peace in all circumstances and with a high resistance to stress and to accidental breakage, are certified for use in food and can be reused several times without the their work is affected. Also facilitate all maintenance operations because it does not require laborious operations that take place in line with the classical systems with screw connections. One push on it to pull out the tube. It can be easily disconnected and reused without spare parts.
Containers with dual internal guanizione ensure a tight seal under all conditions of use with minimal effort to a pressure of 10 bar and being all transparent display allows a real state of clogging of the filters placed inside them and the rule of exhaustion of the resin the indicator changes color.
Compared to traditional systems the water produced is treated with resins Silco antisilicati indicator changes color to remove all traces of phosphate, silicate, nitrate, heavy metals that can still be present after being filtered by the membrane osmostica in order to have production fully deionized water and desicilizzata the highest quality.
The stadium with transparent glass and transparent internal rechargeable cartridge allows only the replacement of exhausted resin inside the same avoiding unnecessary costs. Within minutes, simply unscrew the cup and empty the inner container and reload the deionized water with the new resin. The depletion is due to the clear as the resin changes color from emerald green through to dark blue.
OSMOPURE75 PRO08 uses a membrane Dow Filmtec original produced in the U.S. by 50 GPG (about 290 liters of water a day) with a production capacity increased by 56% compared to the other membrane of equal magnitude with the same working pressure. Thanks to the optimum pressure for which the plant needs only 3.5 bar prevents the purchase of expensive booster pumps and have a greater water production than a traditional plant.
The pre-filters used are made of a special and innovative process to produce a product where quality performance is required which ensures a highly efficient and accurate filtration of impurities in the water.
The gauge for measuring the professional internal pressure of the circuit with double-psi scale bar is mounted on the bracket and ensures a constant and precise monitoring of wear and INTAS filters helping the operator to decide on the exact time for their replacement .
Water quality, however, is constantly monitored by the conductivity online ppm claims to have a constant and precise measurement of the water produced at any time without having to use portable instruments.
The plant has also a system start-up and washing the membrane to start the device in a controlled manner to avoid damage to components and micro tears in the membrane. The washing system of the membrane allows it to have greater consistency and duration of benefits in terms of quality and quantity of water produced compared to conventional reverse osmosis systems.
All connections are fitted with clip locks tweezers to prevent accidental removal of the tube.
The plant OSMOPURE50 PRO08 is a professional glass for the production of osmotic water using the best products commercially available and completely non-toxic providing a minimum rejection of 99%.
Uses and applications:
- Production of water for aquariums.
- For all other uses where you need water production completely deionized and free of harmful components
Reverse osmosis system OSMOPURE50 PRO08 consists of:
- mechanical filtration system consists of a cartridge in sediments with high efficiency to 5 microns for the filtration of rust, sand, particulate matter (it is recommended to replace the cartridge every 2500 to 3000 gallons and not later than 6 months and no later than 12 months for maximum life to the osmotic membrane and a constant yield);
- activated carbon filtration system consists of a sintered activated carbon cartridge that thanks to its structure is able to effectively absorb the chlorine, which could ruin the membrane and all harmful substances in water such as pesticides, etc.. (Recommended to replace the cartridge every 2500 to 3000 gallons and not later than 6 months and not later than 12 months for maximum life to the osmotic membrane and a constant yield);
- osmotic membrane. Dow Filmtec 50 GPD, which dramatically reduces the content of the substances present in the feed with a rejection of about 97 - 98%. Through this process all the unwanted substances dissolved in water are separated through it, producing the permeate (water absolutely pure) and the concentrate which is brought to the discharge (water containing dissolved salts and all pollutants);
- deionized with resins Silca. The deionized water further purified permeate to have a completely deionized water and desicilizzata high quality and with a high degree of purity. Transparent resins contained in the cartridge opening have the ability to turn color when exhausted going from emerald green to blue with a color effect of considerable effect.
- gauge pressure. The pressure gauge located in the front ensures a correct and accurate display of supply pressure. Made with non-toxic material and with dual scale reading (bar - psi) allows to know the supply pressure of the membrane. The decrease in the supply pressure will be the signal to replace the filters that are clogged.
- TDS meter. The gauge of TDS (total dissolved solids) in ppm allows to have a correct display of pure water is entering and upon leaving both. This ensures greater accuracy in knowing how to choose the right moment to change the resins and to monitor the values of the permeate. Pushing the button to OUT you have the value of the feed water while pushing the button to IN you read the value of water quality output.
- system start-up and washing the membrane. The system startup and washing of the membrane allows a constant water production over the years, contributing to less deterioration of the water and provides a first start without any stress to the internal components to prevent premature aging.
Components OSMOPURE50 PRO08:
- Transparent or double inner seal
- 1 sediment cartridge 5 micron high efficiency
- 1 5 micron charcoal sintered
- 1 FILMTEC membrane from 50 GPD (12 Lt / hr)
- 1 deionized rechargeable online with resins SILCO
- 1 standard water mains adapter from 3 / 4 "
- gauge or dual scale
- restrictor or new generation
- TDS meter or online
- system startup and membrane washing
- tubes for the output of the permeate and concentrate
- clamping or Keyword filters
- Manual of use and maintenance in Italian
Parameters for the use of water for the plant OSMOPURE50 PRO08:
- minimum feed water pressure 2.7 bar
- Maximum pressure feed water or 8 bar
- ideal pressure from 3.5 to 4 bar
- TDS 2000 ppm max
- Temperature 5 ° - 45 ° C
- pH 3 to 11
- hardness below 17 ° F or use of softened water. Hardness increased with a decreased yield and a shorter duration of the membrane.
- Iron or less than 0.1 mg / l
- Manganese or less than 0.05 ppm
- use with potable water. The plant must be connected only to drinking water supply. In the event that the water is microbiologically polluted perform adequate disinfection.
Instructions for use and installation:
The plant OSMOPURE75 PRO08 is born to be connected directly to the taps in the output male 3 / 4 "through the link supplied as per figure 1.
The plant can be connected to water mains using different attacks or hydrants with diverter M / F for faucets with leaching rompiflusso that can be purchased separately by clicking here.
Can still be installed in other locations careful that the area is not subject predisposed to frost. The inlet water must be potable. The detailed instructions and assembly operations and installation are described in detail in the manual for use together with the implant.
Figure 1 - water mains adapter standard 3 / 4
The plant can be connected to water mains using different attacks or hydrants with diverter M / F for faucets with leaching rompiflusso that can be purchased separately by clicking here.
Can 'still be installed in other locations careful that the area is not subject predisposed to frost. The inlet water must be potable. The detailed instructions and assembly operations and installation are described in detail in the manual for use together with the implant.
Maintenance:
The plant OSMOPURE75 PRO08 is composed of filters that are to be replaced regularly to keep a constant yield over time and quality of water for which it was designed:
- high sediment cartridge 5 micron filter: Replace every 2500 to 3000 gallons and not later than 6 months
- 5 micron carbon block cartridge: replace every 2500 to 3000 gallons and not later than 6 months
- osmotic membrane or 75-gallon mark FILMTEC: replace every 5 - 7 years or if there is a reduction of the scope.
- resins Silco deionizzanti: replace when Virano from green to blue or when the value exceeds 2 ppm TDS
It is recommended to wash the containers whenever it proceeds to change the filter at least once a year.
We recommend using only original parts FORWATER.
Technical data:
- Production membrane 8 lt / h
- Production Concentrate 2 - 4 times the consumption of water produced
- Rejection or saline 99%
Notes
The production of the membrane of the system varies considerably depending on the temperature of the food (the lower the temperature the lower the production) and the salt content (the higher the lower the salt content of water production).
|
