Reverse osmosis system professional high efficiency
FORWATER OSMO HE is a new and innovative instrument designed to produce water of the highest quality with a very low production waste than traditional systems reverse osmosis.
It 'the first device that looks ecological environment with less waste, increased production and greater purity of the water produced.
With only a 3 bar pressure it is able to produce 1 liter of RO water with a difference of just 2 liters saving up to 50%.
With only 10 liters of osmosis water produced is able to save 10-20 liters of waste water.
With only 100 liters of osmosis water produced is able to save 100-200 liters of waste water.
OSMO HE is able to produce up to 250-290 liters of water per day in the version 75GPD and up to 290-360 liters in the version 100GPD starting from a pressure of only 3 bar.
OSMO HE is made with special components and a high rejection membrane that can achieve a salt rejection of 97 to 99% in the version of 75 gpd and 95-96% in the version from 100 GPD
HIGH QUALITY '
Manufactured in Italy using only the highest quality materials and absolutely non-toxic NSF certified buildings in Europe and the United States for use with potable water and made with the highest standards of quality commercially available.
The system uses pipes in the John Guest LLDPE and quick connect couplings that ensure perfect fit and lasting peace in all circumstances and with a high resistance to shock and accidental breakage.
The glasses used are absolutely transparent to facilitate visual inspection of filters placed in them and made two seals to ensure a tight seal with minimum effort.
The plant is equipped with the washing FORWATER FLUSHVALVE that allows for greater efficiency and durability of the reverse osmosis membrane.
The system can be equipped with accessories sold separately such as booster pumps to increase pressure of 'water and quindirendimento of' plant, kit deionizers post-osmosis, measuring TDS (total dissolved salts).
Uses and applications:
Production of water for aquariums.
For all other uses where you need the production of water free of harmful elements
System components OSMO HE:
Transparent containers with double inner seal
1 FORWATER RSO105 sediment cartridge 5 micron
1 FORWATER CCS105 cartridge coal sintered 5 micron
1 Original FORWATER FILMTEC membrane high rejection
Flush valve Forwater - washing system membrane
1 mains adapter 3/4 "
Tubes JG 1/4 "for the exit of the permeate and concentrate
Manual and maintenance in Italian
The plant OSMO HE was born to be connected directly below the taps with male output 3/4 "with the flip in Recreational amenities inclu; The system can 'be connected to the water mains using different attacks or hydrants with diverter M / F for faucets with strainer jet breaker that can be purchased separately.
Can 'still be installed in other places paying attention for the area prepared not subject to frost. The inlet water must be potable. The details of the instructions and assembly and installation are described in detail in the user manual provided with the system.
Parameters for the use of water for the plants OSMOHE:
Minimum pressure feed water 2.0 bar (lower pressures to use the booster pump FORWATER BP)
Maximum water pressure of 6.5 bar food
Ideal pressure from 3.0 to 5.5 bar
TDS 1000 ppm max
Temperature 5 ° - 45 ° C
Hardness lower than 17 ° F or use of softened water. Hardness increased with a decrease in yield and a shorter duration of the membrane.
Iron less than 0.1 mg / l
Manganese less than 0.05 ppm
Use with potable water. The plant must be connected only to drinking water supply. In the event that the water is microbiologically polluted perform adequate disinfection.
The plant OSMO HE 100GPD consists of filters that should be replaced regularly to keep a constant yield over time and quality of water for which it was designed:
FORWATER RSO105: replace every 2500 to 3000 gallons and not later than 6 months and not more than 12 months
FORWATER CCS105: replace every 2500 to 3000 gallons and not later than 6 Mesie not more than 12 months
Osmotic membrane 100 GPG high rejection: Replace every 1 - 7 years
Production membrane 290-360 lt / day
Production Concentrate 2 times the consumption of water produced
Salt rejection 95-96%
The plant is supplied assembled.
The production of the membrane of the system varies greatly depending on the temperature of the food (the lower the temperature the lower the production) and the salt content (the higher the salt content of water lower the production).