Product: Forwater Extreme Phos Resin Anti-phosphates - 500ml
Applications: Fresh and salt water aquariums
EXTREME PHOS is a new synthetic resin-based iron uptake of phosphate and silicate in fresh water and seawater.
The resin is produced with advanced manufacturing techniques and the process is constantly monitored and controlled throughout the production phase in order to obtain an extremely pure and effective, with a high macro-porous surface to ensure a reduction of phosphate and silicate in a very short time .
EXTREME PHOS is antifosfati resins with the lowest percentage of water: its weight is made up of less than 1% water.
This ensures a strong return in terms of absorption and a high savings.
High levels of phosphate may cause an undesirable proliferation of algae in freshwater and seawater in a slowing of growth and loss of color in hard corals, the growth of unwanted algae.
EXTREME PHOS is ideal for removing phosphates and silicates in the early stages of development and start-up of marine basins and at all times in the fall and removing it requires of them.
Not release unwanted substances in water and toxic.
- Appearance: granular
- Color: brown
- Solubility in water: none
- Particle size: 0.5 - 2.0 mm
- Surface absorption: 100,000 m² / lt
- Absorption P04: 60 g / kg
Applications and usage:
It is recommended to use the product in a fluidized bed filter with a moderate shift of water that move slightly granular. Using it in this way prevents the organic fouling and lengthens the time of effectiveness of the resin.
Recommended Doses: 100 ml per 100 liters of fresh water or marine.
To activate it you should wash it in hot water for Degas and remove traces of residual dust due to transportation.
Place the resin in the fluidized bed filter in the manner specified
Check that there is a slight movement in the filter so that the granules are slightly shake while avoiding an energetic movement.
After a few days to test the content of phosphate out of the fluidized bed filter and replace if found to be traces of phosphate content with new resin.
During the first use, if the content of phosphate in the tank is high, it may happen that EXTREME PHOS is exhausted in a short time and therefore it is recommended to replace it with new resin until the value in the aquarium did not come down to the desired values.
For all subsequent uses EXTREME PHOS be replaced when the output value equals the value of PO4 in the water of the pool.
EXTREME PHOS lends itself to be used in a passive manner by placing it in a bag or sock filter and placing it in an area of high traffic and / or movement.
It is recommended to shake up the bag at least once every two days.
Before any use is recommended to thoroughly wash the resin for several minutes with hot water to be degassed material and make it more effective and to eliminate traces of residual dust.
Warnings and Precautions:
Keep out of reach of children. If swallowed contact a doctor.
May cause eye irritation. In case of contact with eyes, rinse thoroughly with running water holding eyelids open.
Store in a dry and tightly closed.
The resin is not toxic and is not dangerous