Skin Advertising Top
Skin Advertising Sx
Skin Advertising Dx
About us   Our Location   Faq   General Conditions   Orders & Payments   Shipping & Delivery   Privacy Policy   Cookie Policy   Contact
Last Minute
Week Offer
Below Cost
Best Product
Manufacturer Info
Other products
CategoriesAQUARIUM LINE - Catalog Feed
Product Page

Eden Pump 105 - 95-300 L/H 5watt

Eden Pump 105  - 95-300 L/H 5watt
Click to enlarge

Price: 9,89Euro [TaxInc]
Availability: Immediately Available

Notify the updates of this product
Ask a question about this product
Print product page

Pulsanti Social Network non disponibili
Attivare i Cookie di Widget Social Network


Product: Eden Pump 105  - 95-300 L/H 5watt


New style “Whirler” rotor for superior reliability and quietness this unit is equipped with unique new rotor system. Unlike other products the shaft is integral part of the impeller and rotates in two special self-lubricating bushes to withstand wear rubber feet on the pumps.

Adjusting the flow:
The pump has 6 position flow control dial. Rotate the valve toward min or max indicator until the desired flow appears on the display.

The motor is fully encapsulated and self protected against overheating and needs no particular care. If the pump fails to work, first check the electrical supply, connection, circuit breaker ecc... If these are correct, the pump need to be cleaned. Regular cleaning of the strainer, the rotor/impeller and the pump chamber is recommended to remove any debris and lime-scale, which could block the unit.

Prior to any work on the unit, disconnect all electrical equipment from the mains. Remove the pump cover and take off the strainer. Pull the rotor from its location. Carefully rinse all components under running water cleaning with a non-metallic brush such as a toothbrush. If necessary remove lime-scale by leaving the components immersed in vinegar or lemon juice for few hours. Reassemble the unit so that all components are placed in their original position.

Replacing the bushings:
If the pump become too noisy after prolonged running, replace the bushings as follows:
Open the pump and remove old bushings. Replace with new bushings from your dealer just by pushing then with your thumb until they stop in their seats. Take care that holes for shaft are oriented toward the inside.


Eden 109
Dimensions (mm)   54 x 47 x 35
Voltage 230 V/50 Hz
Power Consumption (watt) 5
Turnover rate max. (l/h) 500
Head of water max.(m) .8
Hose connections (inch) 13mm
Connection Cable (m) 1,5
Guarantee (excl. wearing parts) 3 years

Plugin Social Network non disponibili
Attivare i Cookie di Widget Social Network
Log In
E-Mail Address:
New User
Forgot Password?
Shopping Basket
0 items
Free shipping for all orders over 39,00Euro in Italia.