Product: Easy Blade magnets for Large cleaners
Instruction for use:
Easy blade is delivered with the blade inserted in idle position (blade in safe position, fig 1) and is to be glued to the inner part of the algae magnet (the part with the coarse surface) in that position. This is how you do it:
Put the inner part of the magnet on a plane vertical surface with the coarse side facing below (fig. 1).
Fix Easy Blade on the algae magnet using a small amount of glue (Superglue is the tried and tested favourite) spread on top of the magnet as show in fig. 2.
Once the glue has cured, you can put the blade handle into cleaning after loosening the knurled screw and fix it by tightening the screw again. (fig. 3)
The blades for manual aquarium Handy-Blade-Cleaners available in the majority of aquarium shops may be used as replacement blades.
To increase the life of your blade, remove the blade from the Easy Blade, rinse with fresh water and dry with a paper towel. Store metal blade in a dry space until you are ready to use it again. Allowing the metal blade to remain in the aquarium will cause the metal blade to rust.