Product: Brightwell Aquatics Remineraliz-P 250gr - Provides Optimal Mineral Balance for Water that has been Purified
Establishes an optimal mineral balance in water that has been purified (e.g. reverse osmosis, deionization, etc.) or is exceedingly-soft (e.g. well water in forested regions) for all freshwater planted and community aquaria, as well as for biotope aquaria housing fishes indigenous to forested and/or riverine habitats.
Creates an ideal ratio of potassium, calcium, and magnesium, elements which are vital to the overall health of fishes, invertebrates, and aquatic plants; contains trace sodium and chloride for proper osmoregulation in plants and fishes.
May be used to establish beneficial water parameters in aquaria filled with purified water, to replenish depleted mineral concentrations in aquaria that rarely receive a water change, and to re-establish
Instructions and Guidelines
When preparing water for a water change: For every 5 US-gallons of water to be changed, dissolve 2 grams of Remineralīz-P in purified water or tap water and mix thoroughly to dissolve. Assuming a starting GH and TDS of 0, this will result in an increase of ~2.7 dGH and ~60 ppm, respectively. When employed at this dosing rate, 500 g treats 1,250 US-gallons (4,732 L).
When preparing water for a new aquarium set up: Always adjust the water chemistry prior to adding live organisms to the aquarium. If setting up a planted aquarium and placing the plants into the substrate prior to completely filling the aquarium, adjust the GH, KH, pH, and temperature of the water in a separate vessel (e.g. in a large, clean pail or vat) before adding it to the aquarium. Aquariumline suggest do not add purified water to the aquarium and then attempt to adjust the water chemistry afterwards, as this will be stressful to the plants. Use the instructions below to calculate the amount of Remineralīz-P that will be required to bring about the desired change in GH or TDS to the volume of water to be used.
Advanced Instructions: Each gram of Remineralīz-P will increase the GH and TDS in 1 US-gallon of water by 6.7 dGH and 150 ppm, respectively. To obtain a specific GH and/or TDS value, divide the desired change in GH by 6.7 (or if TDS is preferred, divide the desired change in TDS by 150), then multiply this number by the net volume of water (in gallons) in the aquarium. Example: if the GH in 15 US-gallons is to be increased by 5 dGH, then add 11.2 g Remineralīz-P (5 ÷ 6.7 = 0.75 g per gallon; 0.75 g per gallon x 15 gallons = 11.2 g).